HP M1300 Use copy, One-touch copy, Multiple copies, Cancel a copy job, Reduce or enlarge copies

Models: M1300

1 212
Download 212 pages 54.22 Kb
Page 69
Image 69

Use copy

One-touch copy

1.Load the document into the ADF input tray.

2.Press Start Copy on the product control panel to start copying.

3.Repeat the process for each copy.

Multiple copies

Change the number of copies for the current job

1.On the product control panel, use the alphanumeric buttons to set the number of copies (between 1 and 99) that you want to make for the current job.

2.Press Start Copy to begin copying your job.

NOTE: The change in the setting remains active for about 2 minutes after the copy job has been completed. During this time, Custom settings appears on the product control-panel display.

Change the default number of copies

1.On the product control panel, press Setup.

2.Use the arrow buttons to select Copy setup, and then press OK.

3.Use the arrow buttons to select Def. # of copies, and then press OK.

4.Use the arrow buttons to set the number of copies (between 1 and 99) that you want as the default.

5.Press OK to save your selection.

Cancel a copy job

To cancel a copy job, press Cancel on the product control panel. If more than one process is running, pressing Cancel clears the process that currently appears on the product control-panel display.

Reduce or enlarge copies

Reduce or enlarge copies for the current job

1.On the product control panel, press Reduce/Enlarge.

2.Select the size to which you would like to reduce or enlarge the copies in this job.

NOTE: If you select Custom: 25-400%, use the arrow keys to set a percentage.

If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or landscape).

3.Press Start Copy to save the selection and immediately start the copy job, or press OK to save the selection without starting the job.

ENWW

Use copy 59

Page 69
Image 69
HP M1300 manual Use copy, One-touch copy, Multiple copies, Cancel a copy job, Reduce or enlarge copies