HP M1300 manual Copy settings, Copy quality, Adjust the default copy size

Models: M1300

1 212
Download 212 pages 54.22 Kb
Page 70
Image 70

NOTE: The change in the setting remains active for about 2 minutes after the copy job has been completed. During this time, Custom settings appears on the product control-panel display.

You must change the default media size in the media input tray to match the output size, or part of your copy might be cut off.

Adjust the default copy size

NOTE: The default copy size is the size to which copies are normally reduced or enlarged. If you keep the factory default size setting of Original=100%, all copies will be the same size as the original document.

1.Press Setup.

2.Use the arrow buttons to select Copy setup, and then press OK.

3.Use the arrow buttons to select Def. Redu/Enlrg, and then press OK.

4.Use the arrow buttons to select the option for how you normally want to reduce or enlarge copies.

NOTE: If you select Custom: 25-400%, use the arrow keys to set the percentage of the original size that you normally want for copies.

If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or landscape).

5.Press OK to save the selection.

The product can reduce copies to as little as 25% of the original size or enlarge copies to as much as 400% of the original size.

Reduction/enlargement settings

Original=100%

A4 > Ltr=94%

Ltr > A4=97%

Full Page=91%

2 pages/sheet

4 pages/sheet

Custom: 25-400%

NOTE: When using the 2 pages/sheet or 4 pages/sheet setting, select the page orientation (portrait or landscape).

Copy settings

Copy quality

Five copy-quality settings are available: Text, Draft, Mixed, Film photo, and Picture.

The factory-set default for copy quality is Text. This setting is the best for items that contain mostly text.

60 Chapter 8 Copy

ENWW

Page 70
Image 70
HP M1300 manual Copy settings, Copy quality, Adjust the default copy size, Reduction/enlargement settings