HP M1300 manual Avoid repeated jams

Models: M1300

1 212
Download 212 pages 54.22 Kb
Page 157
Image 157

Avoid repeated jams

Verify that the input tray is not overfilled. The input tray capacity varies depending on the type of print media that you are using.

Verify that the media guides are properly adjusted.

Check that the input tray is securely in place.

Do not add print media into the input tray while the product is printing.

Use only HP-recommended media types and sizes. See Paper and print media on page 35 for more information about print media types.

Do not fan media prior to loading it in a tray. To loosen the ream, hold it firmly in both hands and twist the media by rotating your hands in the opposite direction.

Do not let print media stack up in the output bin. The print media type and the amount of toner used affect the output bin capacity.

Check the power connection. Make sure that the power cord is firmly connected to both the product and the power supply box. Plug the power cord into a grounded power outlet.

Make sure that the ADF media lever is set correctly for single-page or multiple-page documents.

To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF.

ENWW

Clear jams 147

Page 157
Image 157
HP M1300 manual Avoid repeated jams