addsource
DESCRIPTION
The addsource command adds a source storage system to the HP 3PAR Online Import Utility that is intended to be migrated.
PARAMETERS
Parameter | Mandatory/Optional | Description |
type | Mandatory | Storage system family name: |
|
| VNX |
|
| CX |
|
| VMAX |
|
| After the following “EXAMPLE” table, |
|
| see the “NOTE” about the type |
|
| parameter in HELP. |
|
|
|
name | Optional | Name of the storage system or serial |
|
| number or 64 bit |
|
| |
|
| identify the storage system. This is |
|
| required especially when there are |
|
| multiple storage systems managed |
|
| under the same IP address. |
|
|
|
uid | Optional | Name of the storage system or serial |
|
| number or 64 bit |
|
| |
|
| identify the storage system. This is |
|
| required especially when there are |
|
| multiple storage systems managed by |
|
| the same |
|
|
|
mgmtip | Mandatory | IP address of the |
|
| managing storage system that is being |
|
| added. |
|
|
|
user | Mandatory | User name for |
|
| managing storage system that is being |
|
| added. |
|
|
|
password | Mandatory | Password for the user of the |
|
| provider that is managing the storage |
|
| system being added. |
|
|
|
port | Optional | Port number on which management |
|
| application accepts request to connect |
|
| and provide source storage system |
|
| details. |
|
| Mandatory if secure flag is used to set |
|
| |
|
| |
|
| secure port 5989 |
|
| unsecure port 5988 |
|
|
|
secure | Optional | This enables or disables secure channel |
|
| communication with source storage |
|
| system. |
|
|
|
74 HP 3PAR Online Import Utility for EMC Storage: Commands