HP Online Import Software manual Removemigration, Removesource, Showconnection

removemigration

Removes migration.

DESCRIPTION

The removemigration command clears completed or abort prepared migrations. Active/Incomplete migrations cannot be removed.

PARAMETERS

Parameter	Mandatory/Optional	Description
migrationid	Mandatory	Number that represents a migration in
		completed/aborted state.

EXAMPLES

removemigration –migrationid 1122334456

> SUCCESS: The specified migration is successfully removed.

removesource

DESCRIPTION

The removesource command removes already added source storage systems. Sources cannot be removed if there is an active migration. Migrations must be completed or aborted to be removed.

PARAMETERS

Parameter	Mandatory/Optional	Description
uid	Mandatory	WWN (World Wide Name).
type	Mandatory	Type of storage system:
		VNX
		CX4
		VMAX

EXAMPLE

>removesource –uid 50060160BEE0177F –type VNX

showconnection

DESCRIPTION

By default, the showconnection command shows a map of all connected source and destination storage systems. There should be 1:1 mapping between source and destination storage systems and destination and source systems for peer port FC connection. Given a source storage system, this shows all the configured destination storage systems it can see and vice versa. However, the parameters, –sourceand –destinationcannot be used together.

80 HP 3PAR Online Import Utility for EMC Storage: Commands