>SUCCESS: Migration job submitted successfully. Please check status/details using showmigration command.
Migration id: 1400939745313
help
DESCRIPTION
Global help command for the HP 3PAR CLI.
PARAMETERS
None.
Abstract
The help command displays available HP 3PAR CLI commands together with short descriptions.
EXAMPLES
>help
CLI provides following commands
showsource | – | List the source storage systems that are already |
added to be treated as | source for a migration job. It shows empty table if no | |
source storage systems | found. | |
showmigration | - | This command displays the list of available migrations |
removemigration | - | Removes the migration identified by the Migration |
ID specified. |
|
|
startmigration | - | Start prepared migration OR restart a prepared migration. |
removesource | - | Removes already added source storage system & clears |
all related migrations. |
| |
addsource | - | Add a source storage system that is intended to be migrated. |
showconnection | - | This command displays connection between all the configured |
source and destination storage systems.
createmigration | - | This will perform preparation phase of | a migration. |
Actual data transfer | will | not be triggered by this command. This | does following |
for a given set of source volumes while presenting to 3PAR destination storage system.
installcertificate | - | Installs certificate from given server IP |
removedestination | - | Removes already added destination storage system & clears |
all related migrations. |
| |
help | - | Global Help Command for CLI |
showdestination | - | List the destination storage systems that are already |
added to be treated as destination for a migration job. It shows empty table | ||
if no destination storage | systems found. | |
adddestination | - | Add a destination storage system that is intended |
to be migrated. |
|
|
showmigrationdetails | - | This command displays the list of volumes associated |
with the specified migration and their corresponding status
Help on a specific <command> can also be obtained by typing “<command>
>
installcertificate
Installs certificate from a given server IP.
DESCRIPTION
The installcertificate command Installs certificates from the specified storage system. This command is executed to add source or destination HP 3PAR StoreServ storage systems in a secure manner. The command fetches and displays certificate details for the specified array.
78 HP 3PAR Online Import Utility for EMC Storage: Commands
