HP 3PAR Online Import Utility createmigration Results in
Problem: Host already exists on destination HP 3PAR StoreServ Storage system with a different WWN.
Solution: If the same host but different WWN: On initial migration of a host, all WWNs to be included in storage group (even if not managing any LUNs). This way subsequent migration of any WWN for this host will find a match. If a different host, change the host name so that it does not match the existing hostname on destination HP 3PAR StoreServ Storage system.
HP 3PAR Online Import Utility createmigration ERROR: OIUERRCS1002.
Problem: Error occurs when the HP 3PAR Online Import Utility tries to verify a
>createmigration
>ERROR: OIUERRCS1002 There is no
OIURSLCS1002 Ensure that there is a
Solution: Verify the source port on the fabric has been zoned with one peer port.
HP 3PAR Online Import Utility addsource ERROR: OIUERRDST0004.
Problem: This error occurs when the HP 3PAR Online Import Utility detects a destination HP 3PAR storage system with firmware version earlier than the minimum.
The following figure shows a successful and an unsuccessful execution of the addsource operation. The failure occurs because the HP 3PAR OS version is not supported.
Solution: Upgrade the HP 3PAR storage system to a supported version. See HP SPOCK for the minimum supported version:
HP SPOCK (http://www.hp.com/storage/spock)
Troubleshooting Issues | 97 |