Prerequisites
•EMC
•The source EMC Storage system must be registered in the EMC
•HP 3PAR Online Import Utility is installed and operational with network access to both the EMC
•Source EMC Storage system and destination HP 3PAR StoreServ Storage system are zoned to each other.
Required Information
Source Storage System:
•IP address of the EMC
◦If the
•User name and password for the EMC
•Port to access EMC
◦Secure port default 5989.
◦
Destination HP 3PAR StoreServ Storage system:
•IP address of the destination HP 3PAR StoreServ Storage system.
•User name and password for the HP 3PAR management application with Super user permission.
Identifying the Source Storage System
To identify the source storage system, follow these steps:
1.From the HP 3PAR Online Import Utility, execute the addsource command.
NOTE: Use your local host user name and password credentials to log into the HP 3PAR Online Import Utility.
Example 48 addsource command
>addsource
>SUCCESS: Added source storage system
2.Execute the showsource command to verify the source storage system information.
Example 49 showsource command
>showsource |
|
|
|
|
NAME | TYPE UNIQUE_ID | FIRMWARE | MANAGEMENT_SERVER OPERATIONAL_STATE | |
CLARiiON+APM00125345014 | VNX 50067890BEE0177F | 05.32.000.5.201 | 10.10.10.10 | Good |
Identifying the Destination Storage System
To identify the destination procedure, follow these steps:
Identifying the Source and Destination Storage Systems 67
