Parameter | Mandatory/Optional | Description |
|
| "testcpg1" |
|
|
|
srchost |
| Name of the host for which all source |
|
| volumes should be considered for |
|
| migration. This should not be there if |
|
| srcvolmap or volmapfile is there. |
For VMAX, use the name of the initiator group on the VMAX that contains the initiator WWN that is being migrated. If nested initiator groups are being used, the parent initiator group (which does not have a direct reference to a WWN) cannot be used.
destprov |
| Provisioning type of the volumes that |
|
| will be created in destination as a result |
|
| of migration (Thin/full). |
destcpg |
| Name of CPG where the migrated |
|
| volumes will be made available. |
migtype | Defaults to offline | Migration type. For the source EMC |
|
| Storage system, the supported migration |
|
| type is MDM, except where volumes |
|
| being migrated do not have a host in |
|
| their storage group on the source EMC |
|
| Storage system. This type of migration |
|
| must be offline. |
destinationuid | Optional | UID of the destination storage system. |
|
| Since there is a 1:1 mapping, this is an |
|
| optional parameter, as the destination |
|
| will be autoselected. |
EXAMPLES
>createmigration
>SUCCESS: Migration job submitted successfully. Please check status/details using showmigration command.
Migration id: 1395864499741 |
|
|
|
| ||
>showmigration |
|
|
| |||
MIGRATION_ID | TYPE | SOURCE_NAME |
|
| DESTINATION_NAME | |
START_TIME |
| END_TIME | STATUS(PROGRESS)(MESSAGE) | |||
1395864499741 | MDM | CLARiiON+APM00123452867 | 3par_7200_DCA_01 | Wed Mar 26 | ||
13:08:19 PDT 2014 |
|
| ||||
>showmigrationdetails |
|
|
| |||
SOURCE_VOLUME | DESTINATION_VOLUME | TASK_ID |
| PROGRESS |
| |
OIU_Test_Lun_01 | OIU_Test_Lun_01 | unknown | 0% |
| ||
The createmigration command example with mixed provisioning type. To create migration with EMC 1 to be thin, but others to be fully provisioned, execute the following command:
createmigration
createmigration 77
