Switch Plugs Off, 10-10 | I-Tech Company CMS 6R4 Series specs

CMS-6R4 Series - User’s Guide

/OFF	Switch Plug(s) Off

Switches selected outlet(s) Off, as described in Section 6.2.2. When a several plugs are switched Off by this command, Boot/Sequence Delay Period will be applied as described in Section 5.5.5.1. The /OFF command can also be entered as /OF.

Note: When this command is executed by a Non-Supervisor, it will only be applied to the plugs that are allowed by the password entered at login.

Availability: Supervisor / Non-Supervisor

Format: /OFF[,Y] <n> [Enter] or /OF[,Y] [Enter]

Where:

,Y	(Optional) Suppresses the Command Conﬁrmation Prompt.
n	The number or name of the plugs that you intend to switch Off.
	To apply the command to several plugs, enter a space character
	or plus sign (+) between each plug number. To apply the
	command to a range of plugs, enter the numbers for the ﬁrst
	and last plugs in the range, separated by a colon character (:).
	To apply the command to all plugs allowed by your password,
	enter an asterisk character (*).

Response:

Verbose: The CMS-6R4 will list the plugs that will be switched Off, and then display the "Sure? (y/n)" prompt, if Y is entered in response to the prompt, the unit will indicate that the command is in process, and then display the main status screen when complete.

Terse: 5 if Y, unit will respond with K.

Example: Assuming that your password allows access to Plug 2 and Plug 3, to switch Plugs 2 and 3 Off, invoke either one of the following command lines:

/OFF,Y 2+3 [Enter] or /OF,Y 2 3 [Enter]

10-10

Image 108

I-Tech Company CMS 6R4 Series manual Switch Plugs Off, Format /OFF,Y n Enter or /OF,Y Enter, 10-10

Contents

Distributed by Page Installation Instructions FCC Part 15 Regulation Table of Contents Upgrading the CMS-6R4 Firmware Command Reference Guide List of Figures CMS-6R4 Series User’s Guide Security Features and Co-Location Features Easy to Configure, Easy to UseIntroduction CMS-6R4 and CMS-6R4 CE Models Typographic Conventions Unit Description Front Panel Components Back Panel Components Back Panel Components 120 VAC Model Shown Unit Description CMS-6R4 Series User’s Guide Hardware Installation Apply Power to the CMS-6R4Quick Start Connect your PC to the CMS-6R4 Communicating with the CMS-6R4 Text Interface Port Name CMD Access Status Mode Status DefaultPlug Name Connecting Ports and Switching Outlets Quick Start CMS-6R4 Series User’s Guide Installation Power Supply ConnectionConnecting Devices to the Switched Outlets Installing the Cable Keeper Connecting Devices to the RS232 Serial Ports Connecting Control Devices to the CMS-6R4Connecting the Network Cable Control via Local PC Configuration Supervisor Mode and Non-Supervisor Mode Communicating with the CMS-6R4 Accessing the Web Browser Interface Main Status Screen Web Browser Interface Sample Values Shown Accessing the Text Interface Plug Name BOOT/SEQ Delay Status DefaultCMS-6R4 Port Name System SetUp Port $ telnet 192.168.168.168 Enter Password Functions Configuration Menus System Parameters Menu System Parameters Menu Web Browser Interface System Parameters Conﬁ guration Password Directory Password Directory Menu Web Browser Interface Edit Password Directory Adding Passwords ADD NAME/PASSWORD ESC CMS-6R4 Series User’s Guide Editing Passwords Deleting Passwords Deleting the Entire Password Directory Dial Back Function Dial Back Example System Parameters MenuUser Account Parameters Network Parameters Menu Network Parameters Network Parameters Telnet ParametersWEB Server Telnet Parameters Web ServerMAC Address IP Security Feature IP Security Conﬁ guration 12 The Telnet Port Parameters Menu Text Interface Telnet Port Parameters Telnet Port Parameters CMS-6R4 Series User’s Guide Conﬁ guration Invalid Access Lockout Feature 3. RS232 Port Parameters 14 Port Parameters Menu Web Browser Interface Conﬁ guration CMS-6R4 Series User’s Guide Conﬁ guration CMS-6R4 Series User’s Guide 3.1. RS232 Port Modes Copying Parameters to Several Ports Copy Serial Port Parameters Conﬁ guration Configuring the Internal Modem Text Interface Type /P 7 and press Enter Plug Parameters Menus 17 Plug Parameters Menu Web Browser Interface Plug #1 Parameters Boot / Sequence Delay Period Reboot Cycles Save Configuration Parameters Operation Operation via the Web Browser InterfaceStatus Screen Web Browser Interface Status Menu Web Browser Interface Operation via the Text Interface DPL Port Name CMD Access Status Screen Text Interface Switching Outlets Text Interface On 1 or /ON Router Applying Commands to Several Outlets Text Interface BO * EnterConnections Between RS232 Ports Text Interface Connecting Ports Disconnecting Ports Three Characters Uses the format EnterLLLEnter, where Enter CMS-6R4 Series User’s Guide Defining Hunt Groups Server Enter Any-to-Any Mode Passive ModePort Modes Hunt Group Example Buffer Mode Reading Data from Buffer Mode Ports Port Buffers Modem Mode Logging Out of Command Mode Automated Mode Operation Direct Connect Feature Standard Telnet Protocol and Raw Socket Mode Direct Connect Configuration Connecting to a Serial Port using Direct Connect Connection Example Terminating a Direct Connect Session Manual Operation Status Screens Main Status Screen /SPort Section Plug Section Main Status Screen Network Status Screen /SN Port Diagnostics Screen /SD Port Diagnostics Name Status Baud COM HS ModeCTS RTS Port Parameters Screen /W Port Parameters Screen Serial PortsPort Parameters #3 RTS/CTS Port Parameters Screen Network Port Port Parameters Screen Network Port Shown User Directory Super CMS-6R4 Series User’s Guide Saving and Restoring Configuration Parameters Sending Parameters to a File Restoring Saved Parameters Upgrading the CMS-6R4 Firmware CMS-6R4 Series User’s Guide Command Reference Guide Command Conventions10-1 Command Summary 10-2 Command Response Messages 10-3 Command Set Initiate Boot CycleResponse 10-4 Connect Format /C x x EnterTerse 10-5 Copy RS232 Port Parameters Third Party Disconnect10-6 Set Plugs to Default State Format /DPL,Y EnterErase Buffer Format /E,Y x x Enter Set to Factory Defaults Set System ParametersHelp 10-8 Reset Network Interface Display Site IDSet Network Port Parameters 10-9 Switch Plugs Off Format /OFF,Y n Enter or /OF,Y Enter10-10 Switch Plugs on Set RS232 Port Parameters10-11 Display Port Diagnostics Set Plug ParametersDisplay Main Status Screen 10-12 Upgrade Firmware Display Network StatusTelnet Telnet Connection Out Send Parameters to a File Unlock Port Invalid Access Lockout View Password DirectoryDisplay Port Parameters Who 10-14 Exit Command Mode Format Default ResponseFormat /X,Y Enter Resident Disconnect Sequence 10-16 Interface Description Serial RS232 Port InterfaceApx-1 Specifications Apx-2 Customer Service Apx-3 Trademark and Copyright Information Apx-4 Index Index-1 Index-2 Index-3 Index Index-4