
CMS-6R4 Series - User’s Guide
NETWORK PARAMETERS: | 207.212.30.80 | |
1. | IP Address: | |
2. | Subnet Mask: | 255.255.255.0 |
3. | Gateway Address: | 207.212.30.1 |
4. | Send MSS: | 536 |
5. | IP Security | Off |
TELNET PORT PARAMETERS | Permit | |
1. | Supervisor Mode: | |
2. | Logoff Character: | ^X |
3. | Sequence Disconnect: | One Character Only |
4. | Inactivity Timeout: | 5 Min |
5. | Response Type: | Verbose |
6. | Command Echo: | On |
7. | Accept Break: | Yes |
8. | Discard LF: | Off |
9. | Invalid Access Lockout: | Off |
CMS>
Figure 7.5: The Port Parameters Screen (Network Port Shown)
7.4.2.Port Parameters Screen - Network Port
The /W (Who) command can also be used to display configuration parameters for the Network Port (Figure 7.5.) To display Network Port Parameters, access the Text Interface command mode via the Network Port, using a password that permits access to Supervisor Level commands, and then invoke the /W without including the port number argument, as shown in the example below:
/W [Enter]
For more information on the various items displayed on the Port Parameters Screen, please refer to the port configuration description in Section 5.5.2.