CMS-6R4 Series - User’s Guide
•Dial Back Delay: Sets the amount of time that will elapse between Dial Back Attempts. For more information on the Dial Back Feature, please refer to Section 5.5.1.6. (Default = 30 Seconds.)
•Edit Password Directory: Provides access to a series of menus that are used to create, edit, and delete passwords/accounts as described in Section 5.5.1.1.
5.5.1.1. The Password Directory
In addition to defining passwords and assigning command privileges to each password, the Edit Password Directory function allows you to determine which ports and switched outlets each password will be allowed to control, and also configures Dial Back parameters. The Password Directory allows for the definition of up to 32 separate passwords.
Note:
•The Password Directory menu is only available when you have logged into command mode using a password that permits access to Supervisor Mode.
•In the Text Interface, the /V command can be invoked to view the Password Directory.
To activate the Edit Password Directory menu, proceed as follows:
•Web Browser Interface: Click the "Setup" button to access the Setup Menus, and then click the "Users" button. The Password Directory Menu will be displayed as shown in Figure 5.5.
•Text Interface: First, type /F and press [Enter] to access the System Parameters Menu (Figure 5.4.) At the System Parameters Menu, type 9 and press [Enter] to display the Password Directory Menu (Figure 5.6.)
The Password Directory Menu offers the following options:
•View Password Directory: Displays a summary of currently defined user accounts. Note that actual passwords will not be displayed, and when configuring the system via the Text Interface, the Password Directory is displayed by invoking the /V command and is not present on the Password Directory menu.
•Add Name/Password (Create Users): Creates new passwords and assigns Supervisor Mode access and port access rights as described in Section 5.5.1.2.
