then the address is an authenticated IP address. For example, if the IP address = 9.47.128.0 and the corresponding Client IP mask = 255.255.255.0, a range of incoming IP addresses would match, i.e. the incoming IP address could equal 9.47.128.0 - 9.47.128.255. The default value is 0.0.0.0.
Access Mode The access level for this community. Either Read/write or
Status | The status of this community. Either enable or disable. |
SNMP trap commands
config snmptrap create
Use this command to add an SNMP trap receiver community name and associated IP address. The maximum length of name is 16
Format | config snmptrap create <name> <ipaddr> |
config snmptrap delete
Use this command to delete a trap receiver from a community.
Format | config snmptrap delete <name> <ipaddr> |
config snmptrap ipaddr
Use this command to assign a new IP address to a specified trap receiver community. The maximum length of name is 16
IP addresses in the SNMP trap receiver table must be unique. If you make multiple entries using the same IP address, the first entry is retained and processed. All duplicate entries are ignored.
Format | config snmptrap ipaddr <ipaddrold> <name> <ipaddrnew> |
config snmptrap mode
Use this command to enable or disable an SNMP trap receiver identified by trap receiver community name and IP address. Enabled trap receivers are active (able to receive traps). Disabled trap receivers are inactive (not able to receive traps).
Format | config snmptrap mode <enable/disable> <name> <ipaddr> |
show snmptrap
Use this command to display information about SNMP trap receivers. Trap messages are sent across the network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six trap receivers are supported at the same time.
Format show snmptrap
SNMP Trap Name
The community string of the SNMP trap packet sent to the trap manager. Note that trap receiver communities and SNMP communities are separate and distinct.
IP Address The IP address that receives SNMP traps from the switch for this trap receiver community.
Status | Indicates whether traps are currently enabled for this community |
168 | Intel® Blade Server Ethernet Switch Module IXM5414E |