ACL Make a selection from the pull-down menu. You may create a new ACL or update the configuration of an existing ACL.

ACL ID

ACL ID must be a whole number between 1 and 100.

Ports

This dynamic multi-selector lists all available valid interfaces for ACL mapping. All non- routing physical interfaces and interfaces participating in LAGs that are not already assigned to an ACL are listed. You can map an interface to one and only one ACL, but multiple interfaces can be assigned to one ACL.

Direction

Select the packet filtering direction for the ACL from the pull-down menu. Currently the only choice is Inbound. The packet direction for a given ACL is the same for all affected interfaces.

Table

Displays the current and maximum number of ACLs.

Current Size/Max Size

Displays the number of existing ACLs and the maximum number of configurable ACLs.

Click the Apply button to send the updated configuration to the switch. Configuration changes take effect immediately. If you want the switch to retain the new values across a power cycle you must perform a save.

Click the Delete button to remove the currently selected ACL from the switch configuration.

138

Intel® Blade Server Ethernet Switch Module IXM5414E

Page 148
Image 148
Intel IXM5414E manual Direction, Current Size/Max Size, 138