System configuration, Network connectivity, 169 | Intel IXM5414E

Enable -

traps will be sent

Disable -

traps will not be sent.

System configuration

Network connectivity

config network javamode

Use this command to enable or disable the java applet that displays a picture of the switch module at the top right of the screen when you are using the Web interface. If you run the applet you will be able to click on the picture of the switch to select configuration screens instead of using the navigation tree at the left side of the screen. The factory default is enabled.

Default enable

Format

config network javamode <enable/disable>

config network parms

Use this command to set the IP Address, subnet mask and gateway of the router. The IP Address and the gateway must be on the same subnet.

Default	10.90.90.9x 255.255.255.0 0.0.0.0
Format	config network parms IPaddress netmask [gateway]

config network protocol

Use this command to specify the network configuration protocol. Select DHCP, BootP, or None. The change is effective immediately.

Default	none
Format	config network protocol none/bootp/dhcp
Values	none The network interface is manually configured with static IP information.
	bootp The network interface is configured to acquire an IP configuration using the
	Bootstrap Protocol (BootP).
	dhcp The network interface is configured to acquire an IP configuration using the
	Dynamic Host Configuration Protocol (DHCP). If you select DHCP and
	management of the Ethernet switch module through the four ports is enabled, the
	switch module will acquire its IP address, network mask, and default gateway from
	a DHCP server when the switch module is turned on or reset.

config network webmode

Use this command to enable or disable access to the switch module via the Web interface. When access is enabled a user can login to the switch from a web browser through TCP port 80. Disabling access takes effect immediately on all interfaces.

Default enable

Format

config network webmode <enable/disable>

Intel® Blade Server Ethernet Switch Module IXM5414E

169

Image 179

Intel IXM5414E manual System configuration, Network connectivity, Default 10.90.90.9x 255.255.255.0 Format, 169

Contents

C66107-004 Page Contents Page Safety To Disconnect To Connect Vii Statement Viii XxCAUTION Page Page Related publications Major components of the IXM5414E switch module Ports Specifications and featuresPerformance features Garp Gmrp Gvrp Standards Management Intel Blade Server Ethernet Switch Module IXM5414E Network Cable Support Ethernet interface requirements Handling static-sensitive devices Installation guidelinesModule Bay Switch-module function System reliability considerations Installing the IXM5414E switch module Sbce Intel Blade Server Ethernet Switch Module IXM5414E Removing the IXM5414E switch module Intel Blade Server Ethernet Switch Module IXM5414E Intel Blade Server Ethernet Switch Module IXM5414E LEDs Information panel Intel Blade Server Ethernet Switch Module IXM5414E Chassis configuration and operation Intel Blade Server Ethernet Switch Module IXM5414E overview Switch module management and control IP addresses and Snmp community names Module bay number Default IP address Traps Topology change Spanning Tree Protocol STP Authentication failureManagement Information Bases MIB Port mirroring Packet forwarding Switching conceptsAuthentication Simple Network Management Protocol Snmp Spanning Tree Protocol STP Ieee 802.1Q VLANs Virtual Local Area Networks Vlan Forwarding rules between ports Ieee 802.1Q Vlan packet forwarding Ieee 802.1Q Tag Ieee 802.1Q Vlan tags Egress rules Port Vlan IDTagging and untagging Generic Attribute Registration Protocol Garp Ieee 802.1Q Vlan configurationStatic MAC filtering Group Membership Information Group Service Requirements InformationGarp Vlan Registration Protocol Gvrp Garp Multicast Registration Protocol Gmrp Internet Group Management Protocol Igmp snooping Distribution method Static LAGs Dynamic Host Configuration Protocol Dhcp Ieee AuthenticatorAuthentication server Security Secure Shell SSH Radius authenticationLocal authentication Secure Socket Layer SSL SSL Feature Component Type Bandwidth Allocation Profile Quality of Service QoSBandwidth provisioning Access Control Lists ACL Intel Blade Server Ethernet Switch Module IXM5414E Introduction Remotely managing the switch module Getting started Intel Blade Server Ethernet Switch Module IXM5414E QOS System MAC Address ARP cacheInventory information Machine Model Maintenance LevelSystem Description Machine Type Network Processing Device ConfigurationSystem description Operating System Network connectivity Burned In MAC Address Default GatewayNetwork Configuration Protocol Maximum Number of Telnet Sessions Telnet Login Timeout minutesTelnet User accounts User PasswordConfirm Password Snmp v3 Access Mode Encryption Key Login configurationAuthentication Protocol Encryption Protocol Login session Connection From Login summaryID of this row 802.1X Port Security Users User loginLogin Users Method List Authentication is complete Aging Interval secs ConfigurationForwarding database Search IfIndex FilterLearned MAC Address Search Other LogsMessage log Gmrp Learned Days, hours, minutes and seconds Event logTime TaskID PortEntry Filename Probe Physical Mode Admin ModeFlow Control Mode Lacp Mode Summary Forwarding State STP ModePort Type Link Trap Control ModeMirroring Link Status Port to be Mirrored Port Mirroring Mode Name Community configurationCommunity Client IP Mask Trap receiver configurationClient IP Address Trap receiver summary IP Address EnableDisable Supported Management Information Bases MIB Description RFC title or MIB description Switch detailedStatistics Multicast Packets Received Packets Received Without ErrorOctets Received Unicast Packets Received Multicast Packets Transmitted Packets Transmitted Without ErrorsOctets Transmitted Unicast Packets Transmitted Packets Received With Error Switch summaryTotal Packets Received Without Errors Vlan Entries Currently In Use Transmit Packet ErrorsPort detailed Address Entries Currently In Use Packets Received 128-255 Octets Total Packets Received with MAC ErrorsPackets Received 64 Octets Packets Received 65-127 Octets Fragments/Undersize Received Alignment ErrorsRx FCS Errors Jabbers Received Packets Transmitted 1024-1518 Octets Total Transmit ErrorsTx FCS Errors Underrun Errors Rstp BPDUs Received Excessive Collision FramesSTP BPDUs Received STP BPDUs Transmitted Port summary Collision Frames Save all applied changes System resetSystem utilities Reset passwords to defaults Reset configuration to defaults Download file to switch Tftp File Name File TypeTftp Server IP Address Tftp File Path Upload file from switch Ping Trap managerPing Trap flags Multiple Users AuthenticationTrap log Link Up/Down Switching Vlan Name Vlan ID and Name Multicast Packets/Second Broadcast Storm Control ModeMulitcast Storm Control Mode Broadcast Packets/Second Tagged All frames transmitted for this Vlan will be tagged Status Acceptable Frame Types Port configurationMulticast Storm Control Mode Port Vlan ID All. The factory default is Filters Reset configurationMAC filter configuration Destination Port Mask MAC filter summary Destination Port Members Switch GvrpSwitch Gmrp 100 Switch configuration 101 Gvrp ModeGmrp Mode 102 Max Response Time secs Less Than Group Membership Interval Configuration and statusIgmp snooping Group Membership Interval secs 104 Interface configuration 105 Administrative ModeLAG Name Create LAG Name 106 Membership ConflictsLogical port identifier of the LAG, in the format lag.port 107 Mfdb tableMember Ports Forwarding Ports Gmrp tableComponent Type 109 Igmp snooping table 110 Switch configuration/statusSpanning tree Stats Force Protocol Version Common Spanning Tree CST configuration/statusSpanning Tree Admin Mode Configuration Digest Key 112 113 CST port configuration/status 114 115 Class of serviceStatistics Rstp BPDUs. Transmitted Traffic Class Port access control802.1p priority mapping User Priority 117 118 Force UnauthorizedForce Authorized Quiet Period secs 119 Port status 120 PAE Capabilities Authenticator PAE StateControl Direction Protocol Version 122 Backend State 123 Operating Control ModeKey Transmission Enabled 124 125 Login 126 Port access privilegesPort access summary 127 Radius 128 Server configuration 129 130 Radius statisticsServer statistics Invalid Server Addresses 131 132 Accounting server configuration Accounting Responses Accounting server statisticsAccounting Requests Accounting Retransmissions Malformed Accounting Responses TimeoutsSecure Http Clear statistics Https Port Https Admin ModeTLS Version SSL Version 136 Secure ShellSSH Version SSH Connections in Use 137 Access Control ListsQoS 138 DirectionCurrent Size/Max Size 139 Rule configurationACL identifier 140 RuleAction 141 142 Bandwidth profile configurationSource L4 Port Keyword Source L4 Port Number Destination L4 Port Keyword Destination L4 Port Number 143 Bandwidth profile summaryBandwidth Profile Maximum Bandwidth 144 Traffic class configurationAllocated Minimum Bandwidth 145 WeightInterface 146 Traffic class summaryAccept Byte Count 147 LogoutInterface allocation summary 148 149 Determining the software version Obtaining the latest version Upgrading the switch softwareUpgrading the image using Telnet Upgrading the MCU code using Telnet 151 Upgrading the image using web interface 152 Resetting and restarting the switch moduleUpgrading the MCU code using web interface 153 154 155 Command Line Interface CLI conventionsCommand name Format 156 ParametersValues 157 CommentsSpecial characters Str Remotely managing the IXM5414E switch moduleConnecting to the IXM5414E switch module Execute the nth command in history buffer 159 Changing configuration settings 160 IXM5414E switch module system commandsInitial configuration Managing user accounts Forwarding DB System commandsAddress Resolution Protocol ARP cache 162 Inventory informationShow inventory Logs Port commands 164 Default disable FormatAcceptable values are 165 FlowControl ModeMirroring commands 166 Snmp community commandsSimple Network Management Protocol Snmp 167 Format show snmpcommunity Snmp Community Name 168 Status Status of this community. Either enable or disableSnmp trap commands Format show snmptrap Snmp Trap Name Network connectivity System configurationDefault 10.90.90.9x 255.255.255.0 Format Format Config network protocol none/bootp/dhcp Values 170 Format Show network IP AddressTelnet 171 Format show telnet Telnet Login Timeout minutesUser accounts Use of zero instead of the letter O Format Config users passwd userDefault No authentication Format Default No encryption Format 173 LoginConfig prompt Show stats port detailed Config syscontactConfig syslocation Config sysname 175 Total Packets Received Without ErrorFragments/Undersized Received 176 Gvrp PDUs Failed Registrations Total Transmit Packet DiscardedBPDUs Received BPDUs Transmitted 178 Show stats switch detailedShow stats port summary 179 180 Show stats switch summary 181 System utility commandsSystem utilities Show sysinfo 182 Format logout 183 Transfer download commandsDefault code Format 184 Transfer upload commandsTftp Server IP Tftp Filename 185 Trap manager 187 Switching configuration commandsShow traplog Generic Attribute Registration Protocol Garp commands 189 Config garp leavetimerShow garp info Show garp interface Config igmpsnooping interfacemode Igmp snooping commandsConfig igmpsnooping adminmode Config igmpsnooping groupmembershipinterval Config lag adminmode Link Aggregation LAG commandsConfig igmpsnooping mcrtrexpiretime Config lag addport Config lag linktrap Config lag createConfig lag deletelag Config lag deleteport Config macfilter deldest MAC filter commandsConfig macfilter adddest Config macfilter create Show mfdb igmpsnooping Multicast Forwarding Database Mfdb commandsShow macfilter Show mfdb gmrp 195 Show mfdb staticfilteringShow mfdb stats Show mfdb table Spanning tree bridge commands Spanning tree commands Spanning tree Common Spanning Tree CST commands 198 Show spanningtree cst port detailed 199 Show spanningtree cst port summary Spanning tree summary commands Spanning tree port commands Virtual Local Area Network Vlan commands Config vlan port priority Config vlan nameConfig vlan participation Config vlan port acceptframe 203 Config vlan port taggingShow vlan detailed 204 Show vlan portShow vlan summary Default = see table below Class of Service commandsConfig classofservice 802.1pmapping Show classofservice 802.1pmapping Authentication commands Security configuration commands Ieee 802.1X commands Config dot1x port controlmode Config dot1x adminmodeConfig dot1x defaultlogin Config dot1x login Config dot1x port reauthperiod Config dot1x port quietperiodConfig dot1x port reauthenabled Config dot1x port reauthenticate Show dot1x port detailed Config dot1x port transmitperiodConfig dot1x port users add Config dot1x port users remove 211 Show dot1x port statsFormat Show dot1x port stats port Port 212 Show dot1x port summaryShow dot1x port users Show dot1x summary Radius accounting commands Remote Authentication Dial-In User Service Radius commands Clear radius stats Radius configuration / summary commandsConfig radius maxretransmit Show radius accounting summary 215 Config radius timeoutShow radius stats Show radius summary Radius server commands 217 Server IP AddressShow radius server summary Secure Socket Layer SSL commands Secure Shell SSH commands Access Control List ACL commands Quality of Service QoS commands Config acl rule match dstip Config acl rule actionConfig acl rule create Config acl rule delete Config acl rule match srcip Config acl rule match everyConfig acl rule match protocol keyword Config acl rule match protocol number 222 Config acl rule match srcl4port numberShow acl detailed Show acl summary BW provisioning BW allocation commands Bandwidth provisioning commands BW provisioning traffic class commands 225 Show bwprovisioning trafficclass allocatedbwShow bwprovisioning trafficclass detailed Show bwprovisioning trafficclass summary 226 227 Contact pin number Label Media direct interface signal 228 Standard Data transmission rate Media type Maximum distance 229 230 Ieee 231Bandwidth Provisioning Secure Shell Remote Authentication Dial-in User ServiceVlan Switching 232 Igmp Snooping Heading233 Spannng Tree Protocol STP 234Link Aggregation 235 Utilities 236Telnet User Accounts 237 238 239 Appendix D CLI Command Tree 240 241 242 Spanningtree 243 244 Show 245 246 Transfer 247 248 249 Bridging configuration exampleConfig spanningtree bridge priority 250 Config forwardingdb agetime 251 Ieee 802.1w configuration exampleConfig spanningtree forceversion 802.1w Config spanningtree forceversion 802.1d 252 Vlan configuration exampleConfig vlan create Config vlan port pvid 2 bay.3,bay.4 253 Link aggregation configuration example Show mfdb table all Igmp snooping configuration exampleConfig igmpsnooping adminmode enable Config igmpsnooping mcrtrexpiretime Config acl interface add ext.1 inbound Access Control List configuration exampleConfig acl create Config acl rule create 1 256 Config acl interface add ext.4 inbound 257 Parameter Description Default valueSpanning Tree Protocol STP operation 258 Variable Description Default valueCreating a stable topology 259 Ieee 802.1D STP port states Role Ieee 802.1w STP port states260 Port state 261 Setting user-changeable STP parametersForward Delay Feature Default value 262 Illustration of STP 263 This example, only the default STP values are used 264 Discarding state 265 Learning state 266 Forwarding state 267 268 Disabled state 269 Troubleshooting STPSpanning Tree Protocol Failure Full/half duplex mismatch 270 Unidirectional link 271 Resource errorsPacket corruption Identifying a data loop 272 Avoiding network problems 273 274 275 Before you call 276 277 Safety and regulatory information 278 General SafetyElectrical Safety 279 Handling electrostatic discharge-sensitive devices 280 Regulatory specifications and disclaimersSafety compliance 281 Electromagnetic compatibility EMCJapan EMC Compatibility 282 RRL Korea User’s Information English translation of the previous notice283 Device 284