Intel IXM5414E manual Show mfdb staticfiltering, Show mfdb stats, Show mfdb table, 195

show mfdb staticfiltering

Use this command to display the Static Filtering entries in the MFDB.

Format	show mfdb staticfiltering
Mac Address
	A MAC address and VLAN pair for which the switch has forwarding and/or
	filtering information. The format is two, two-digit hexadecimal numbers,
	representing the VLAN and six, two-digit hexadecimal numbers, representing the
	MAC address, separated by hyphens; for example, 00-01-00-23-45-67-89-AB.
Type	Displays the type of the entry. Static entries are those that are configured by the end
	user. Dynamic entries are added to the table as a result of a learning process or
	protocol.
Description	The text description of this multicast table entry.
Interfaces	The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

show mfdb stats

Use this command to display the MFDB statistics.

Format show mfdb stats

Max MFDB Table Entries

Displays the total number of entries possible in the MFDB table.

Most MFDB Entries Since Last Reset

Displays the largest number of entries that have been present in the MFDB table since the switch was reset. This value is also known as the MFDB high-water mark.

Current Entries

Displays the current number of entries in the MFDB table.

show mfdb table

Use this command to display the MFDB information. If the command is entered with no parameter, the entire table is displayed. This is the same as entering the optional <all> parameter. The user can display the table entry for one MAC address by specifying the MAC address as an optional parameter.

Format	show mfdb table [macaddr/all]
Mac Address
	A MAC address and VLAN pair for which the switch has forwarding and/or
	filtering information. The format is two, two-digit hexadecimal numbers,
	representing the VLAN and six, two-digit hexadecimal numbers, representing the
	MAC address, separated by hyphens; for example, 00-01-00-23-45-67-89-AB.
Type	This displays the type of the entry. Static entries are those that are configured by the
	end user. Dynamic entries are added to the table as a result of a learning process or
	protocol.
Component	The component that is responsible for this entry in the MFDB. Possible values are
	IGMP Snooping, GMRP, and Static Filtering.
Description	The text description of this multicast table entry.
Interfaces	The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

Intel® Blade Server Ethernet Switch Module IXM5414E 195