Remote Authentication Dial-In User Service (RADIUS) commands
RADIUS accounting commands
config radius accounting mode
Use this command to enable or disable the RADIUS accounting function.
Default disable
Format | config radius accounting mode <enable/disable> |
config radius accounting server add
Use this command to configure the IP address to be used to access the accounting server. Only a single accounting server can be configured. If an accounting server is currently configured it must be removed using the config radius accounting server remove command before this command will succeed.
Format | config radius accounting server add <ipaddr> |
config radius accounting server port
Use this command to configure which User Datagram Protocol (UDP) port will be used to access the accounting server. The IP address specified must match that of the previously configured accounting server. If a port is already configured for the accounting server, the new port will replace the previously configured value.
Default 1813
Format | config radius accounting server port <ipaddr> |
config radius accounting server remove
Use this command to remove a configured accounting server. The IP address specified must match that of the previously configured accounting server. Since only a single accounting server is supported, issuing this command will cause future accounting attempts to fail.
Format | config radius accounting server remove <ipaddr> |
config radius accounting server secret
Use this command to configure the secret shared between the RADIUS client and accounting server. The IP address specified must match that of the previously configured accounting server. When you enter this command, you will be prompted to enter the secret, which must be an alphanumeric value of 20 characters or less.
Format | config radius accounting server secret <ipaddr> |
show radius accounting stats
Use this command to display the RADIUS statistics for the accounting server.
Format show radius accounting stats <ipaddr>
Accounting Server IP Address
The IP address of the server whose statistics are displayed on this row.
Round Trip Time
The time, in hundredths of a second, between the most recent RADIUS accounting response and the matching accounting request from this RADIUS accounting server.
Accounting Requests
The number of RADIUS accounting request packets sent to this accounting server, not including retransmissions.
Intel® Blade Server Ethernet Switch Module IXM5414E | 213 |
