User Access Mode

Shows whether the user is able to change parameters on the switch (Read/write) or is only able to view them (Read-only). As a factory default, admin has Read/write access and guest has Read-only access. There can only be one Read/write user and up to five Read-only users.

SNMPv3 Access Mode

Displays the SNMPv3 Access Mode. If the value is set to Read/write, the SNMPv3 user will be able to set and retrieve parameters on the system. If the value is set to Read-only, the SNMPv3 user will only be able to retrieve parameter information. The SNMPv3 access mode does not have to be the same as the CLI and Web access modes.

SNMPv3 Authentication

The protocol (if any) that will be used to authenticate the user.

SNMPv3 Encryption

The encryption protocol (if any) that will be used for the authentication process.

Login

config loginsession close

Use this command to close a specified Telnet session.

Format

config loginsession close <sessionid/all>

show loginsession

Use this command to display currently active Telnet and serial port connections to the switch.

Format

show loginsession

ID

Login Session ID

User Name

The account name used to login via the serial port or Telnet.

Connection From

The IP address of the Telnet client machine or EIA-232 for the serial port connection.

Idle Time Time this session has been idle.

Session Time

Total time this session has been connected.

System description

config prompt

Use this command to change the prompt that is displayed when you use the CLI. You may enter up to 64 alphanumeric characters.

Format

config prompt <system prompt>

Intel® Blade Server Ethernet Switch Module IXM5414E

173

Page 183
Image 183
Intel IXM5414E manual Login, Config prompt, 173