RADIUS Server IP Address
Select the RADIUS Server to be configured. Select Add to add a new server.
Port The User Datagram Protocol (UDP) port used by this server. The valid range is 0 - 65535.
Secret
The shared secret for this server. The data entered in this field will not be displayed.
Apply
The Secret is applied only if this box is checked. If the box is not checked, anything entered in the Secret field has no affect and is not retained. This field is only displayed if the user has Read/Write access.
Primary Server
Sets the selected server to be the Primary or Secondary server.
Message Authenticator
Enable or Disable the message authenticator attribute for the selected server.
Secret Configured
Indicates whether the shared secret for this server has been configured.
Current
Indicates whether this server is currently in use as the authentication server.
Click the Apply button to send the updated screen to the switch and cause the changes to take effect on the switch. If you want the switch to retain the new values across a power cycle you must perform a save.
Click the Remove button to remove the selected server from the configuration. This button is only available to Read/Write users. If you want the switch to retain the new values across a power cycle you must perform a save.
Click the Refresh button to update the information on the page.
Intel® Blade Server Ethernet Switch Module IXM5414E | 129 |
