config garp leavetimer
Use this command to configure the GARP Leave Time for the specified port(s). Leave Time is the time to wait after receiving an unregister request for a VLAN or a multicast group before deleting the VLAN entry or group. This allows time for another station to assert registration for the same attribute in order to maintain uninterrupted service. The time may range from 20 to 600 centiseconds.
This command has an effect only when GVRP is enabled.
Default | 60 centiseconds (0.6 seconds) |
Format | config garp leavetimer <port/listofports/all> |
show garp info
Use this command to display GARP information for the IXM5414E switch module.
Format show garp info
GMRP Admin Mode
This displays the administrative mode of GMRP for the switch module. The default is disable.
GVRP Admin Mode
This displays the administrative mode of GVRP for the IXM5414E switch module. The default is disable.
show garp interface
Use this command to display GARP information for one, some or all interfaces.
Format | show garp interface <port/listofports/all> |
Port | This displays the identification of the interface that this row in the table describes. |
Join Timer | Displays the interval between the transmission of GARP PDUs registering (or re- |
| registering) membership for an attribute. Current attributes are a VLAN or a |
| multicast group. There is an instance of this timer on a |
| participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 seconds) |
| in increments of 1 centisecond (0.01 seconds). The factory default is 20 |
| centiseconds (0.2 seconds). |
Leave Timer | Displays the period of time to wait after receiving an unregister request for an |
| attribute before deleting the attribute. Current attributes are a VLAN or a multicast |
| group. This allows time for another station to assert registration for the same |
| attribute in order to maintain uninterrupted service. There is an instance of this |
| timer on a |
| centiseconds (0.2 to 6.0 seconds) in increments of 1 centisecond (0.01 seconds). |
| The factory default is 60 centiseconds (0.6 seconds). |
LeaveAll Timer
Shows how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to maintain registration. There is an instance of this timer on a
Intel® Blade Server Ethernet Switch Module IXM5414E | 189 |