User

Use this pull-down menu to select one of the existing accounts, or select Create to

 

add a new one, provided the maximum of five Read-only accounts has not been

 

reached.

User Name

The name the user will use to login using the serial port, Telnet or Web. It can be up

 

to eight alphanumeric characters and is not case-sensitive. Six user names can be

 

defined, including the Read-only user “GUEST” which cannot be changed. The

 

admin user will enter USERID (all caps, case sensitive) in this field.

Password

Enter the optional new or changed password for the account. It will not display as it

 

is typed, only asterisks (*) will show. The password is up to eight alphanumeric

 

characters and is case-sensitive. Default for GUEST is blank and for the admin is

 

“PASSW0RD” (please note the use of zero instead of “O”).

Confirm Password

Enter the password again to confirm that you entered it correctly. The information entered in this field will not display, but will show as asterisks (*).

Access Mode Displays whether the user is able to change parameters on the switch (Read/Write) or is only able to view them (Read-only). As a factory default, admin has Read/Write access and GUEST has Read-only access. There can only be one Read/Write user and up to five Read-only users.

SNMP v3 Access Mode

Indicates the SNMPv3 access privileges for the user account. If the value is set to Read/Write, the SNMPv3 user will be able to set and retrieve parameters on the system. If the value is set to Read-only, the SNMPv3 user will only be able to retrieve parameter information. The SNMPv3 access mode may be different from the CLI and Web access mode.

52

Intel® Blade Server Ethernet Switch Module IXM5414E

Page 62
Image 62
Intel IXM5414E manual User Name, Confirm Password, Snmp v3 Access Mode