Intel IXM5414E manual 235

Table 9. Default settings for run-time switching software variables (continued)

	Sub-
Heading	heading		Variable	Default value	Command
			Configuration update	Disable
			Default gateway	0.0.0.0
			IP address	10.90.90.9x, where x
				depends on the
				number of the bay into
				which you have
				installed the switch
				module.
			Subnet mask	255.255.255.0
	Configuration
			System Contact	Blank	config syscontact
			System Location	Blank	config syslocation
			System Name	Blank	config sysname
	Forwarding
	Database
			Forwarding Database	300 seconds	config forwardingdb
			aging time		agetime
	Port
	Configuration
			Auto Negotiation	Enable	config port autoneg
			Flow control	Disable	config port flowcontrol
			LACP mode	Disable	config port lacpmode
			Port Enable	Enable	config port adminmode
		Mirroring
			Mirroring Mode	Disable	config mirroring mode
	Network
	Connectivity
			IP connectivity	10.90.90.9x	config network parms
			parameters	255.255.255.0 0.0.0.0
			IP connectivity	None	config network protocol
			protocol
			Java enable status	Enable	config network
					javamode
			Web enable status	Enable	config network
					webmode
	SNMPcommunit
	y

Intel® Blade Server Ethernet Switch Module IXM5414E 235