nonvolatile
Warm start This trap indicates that the switch module has been restarted; however, the power- on
Authentication failure
This trap indicates that someone has tried to log on to the switch module using an invalid SNMP community string. The switch module automatically stores the source IP address of the unauthorized user.
Topology change (Spanning Tree Protocol (STP))
This trap indicates that one or more of the configured ports has changed from the learning state to the forwarding state, or from the forwarding state to the blocking state.
Link up This trap indicates that the link state of a port has changed from link down to link up.
Link down This trap indicates that the link state of a port has changed from link up to link down.
Management Information Bases (MIB)
Management and counter information are stored in the switch module in the management information base (MIB). The switch module uses the standard
Read/Write MIBs variables are usually related to
If you use a
Port mirroring
The IXM5414E switch module enables you to copy packets that were transmitted and received on a source port and to redirect the copies to another target port. The source port can be either one of the four 10/100/1000 Mbps external ports, or one of the fourteen internal blade server ports. The target port is where you will connect a monitoring/troubleshooting device, such as a sniffer or an RMON probe. The target port must be one of the four 10/100/1000 Mbps external ports.
Intel® Blade Server Ethernet Switch Module IXM5414E | 23 |