Secure Shell (SSH) commands
config ssh adminmode
Use this command to enable or disable SSH.
Default Disabled
Format | config ssh adminmode <enable/disable> |
config ssh protocol
Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2) or both (1 and 2) can be set.
Default both
Format | config ssh protocol <ssh1/ssh2/both> |
show ssh info
Displays the SSH settings.
Format show ssh info
Administrative Mode
Indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level
The protocol level may have the values of version 1, version 2 or both versions 1 and 2.
Connections Specifies the current SSH connections.
Secure Socket Layer (SSL) commands
config http secureport
Use this command to configure the SSL port where port is between 1 and 65535.
Default 443
Format | config http secureport <port> |
config http secureprotocol
Use this command to enable or disable SSL and set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or to both TLS1 and SSL3.
Default both
Format | config ip http |
config http secureserver adminmode
Command is used to enable/disable the SSL for secure HTTP.
Default disable
Format | config http secureserver adminmode <enable\disable> |
show http info
Displays the http settings for the switch.
Format | show http info |
218 | Intel® Blade Server Ethernet Switch Module IXM5414E |
