Intel IXM5414E manual Filter, Learned, MAC Address Search, IfIndex, Status

Filter	Specify the entries you want displayed from the pull-down menu. Once a choice is
	made the list is automatically refreshed with the selected filter. Filter choices are:
	Learned
	Only MAC addresses that have been learned will be displayed.

All The entire table will be displayed.

MAC Address Search

You may also search for an individual MAC address. Enter the two byte hexadecimal Virtual Local Area Network (VLAN) ID followed by the six byte hexadecimal MAC address in two-digit groups separated by hyphens; for example, 01-23-00-67-89-AB-CD-EF where 01-23 is the VLAN ID and 45-67-89-AB-CD- EF is the MAC address. Then click the Search button. If the address exists, that entry will be displayed as the first entry followed by the remaining (greater) MAC addresses. An exact match is required.

MAC Address

A unicast MAC address for which the switch has forwarding and/or filtering information. The format is a two byte hexadecimal VLAN ID number followed by a six byte MAC address with each byte separated by hyphens, for example 00-01-00- 23-45-67-89-AB.

Source Port The port where this address was learned – i.e. the port through which the MAC

	address can be reached. In the above example, CMM refers to Chassis Management
	Module ports.
ifIndex	The ifIndex of the MIB interface table entry associated with the port.
Status	The status of this entry. The possible values are:
	Learned
	The entry was learned by observing the source MAC addresses of incoming
	traffic, and is currently in use.

Intel® Blade Server Ethernet Switch Module IXM5414E 59