Intel IXM5414E manual Generic Attribute Registration Protocol Garp commands

Generic Attribute Registration Protocol (GARP) commands

config garp gmrp adminmode

Use this command to enable or disable the GARP Multicast Registration Protocol (GMRP) on the switch module.

Default disable

Format config garp gmrp adminmode <enable/disable>

config garp gmrp interfacemode

Use this command to enable or disable the GMRP on one, some or all interfaces. If an interface which has GARP enabled is enabled for routing or is made a member of a LAG, GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled if routing is disabled or LAG membership is removed from an interface that previously had GARP enabled.

Default disable

Format config garp grmp interfacemode <port/listofports/all><enable/disable>

config garp gvrp adminmode

Use this command to enable or disable GVRP on the switch module.

Default disable

Format config garp gvrp adminmode <enable/disable>

config garp gvrp interfacemode

Use this command to enable or disable GVRP for one, some or all interfaces. If GVRP is disabled, Join Time, Leave Time and LeaveAll Time have no effect.

Default disable

Format config garp gvrp interfacemode <port/listofports/all> <enable/disable>

config garp jointimer

Use this command to configure the GARP Join Time for the specified port(s). Join Time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re- registering) membership for a VLAN or multicast group.

This command has an effect only when GVRP is enabled. The time may range from 10 to 100 centiseconds.

Default	20 centiseconds (0.2 seconds)
Format	config garp jointimer <port/listofports/all> <10-100>

config garp leavealltimer

Use this command to configure how frequently LeaveAll PDUs are generated for the specified port(s). A LeaveAll PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 centiseconds.

This command has an effect only when GVRP is enabled.

Default	1000 centiseconds (10 seconds)
Format	config garp leavealltimer <port/listofports/all> <200-6000>

188 Intel® Blade Server Ethernet Switch Module IXM5414E