Electromagnetic compatibility (EMC)
USA: | FCC CFR 47 Part 2 and 15, Verified Class A Limit | |
|
| |
Canada: | IC | |
|
| |
Europe: | EMC Directive, 89/336/EEC | |
| EN55022, Class A Limit, Radiated & Conducted Emissions | |
| EN55024 ITE Specific Immunity Standard | |
| ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge) | |
| Radiated Immunity (Level 2) | |
| Electrical Fast Transient (Level 2) | |
| ||
| ||
| Power Frequency Magnetic Fields | |
| ||
|
| |
Japan: | VCCI Class A ITE (CISPR 22, Class A Limit) | |
|
| |
Australia/New | AS/NZS 3548, Class A Limit | |
Zealand: |
|
|
|
| |
Taiwan: | BSMI Approval | |
|
| |
Korea: | RRL Approval | |
|
| |
Russia: | GOST Approval | |
|
| |
International: | CISPR 22, Class A Limit | |
|
|
|
Electromagnetic compatibility notice (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Electromagnetic compatibility notices (International)
Europe (CE Declaration of Conformity): This product has been tested in accordance to, and complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark to illustrate its compliance.
Japan EMC Compatibility:
Intel® Blade Server Ethernet Switch Module IXM5414E | 281 |