Intel IXM5414E manual 231, Bandwidth Provisioning, Ieee

Appendix C Run-time Switching Software

Default Settings

The following table contains the default settings for the run-time switching software variables. Variables are separated by category and further by sub-headings (listed alphabetically within category). "Default value" is self-explanatory while "Command" lists the CLI command used to change the default setting.

Table 9. Default settings for run-time switching software variables

	Sub-
Heading	heading	Variable	Default value	Command
Quality of
Service
	ACL
		ACL Rule	None	config acl rule create
	Bandwidth
	Provisioning
		Bandwidth Allocation	100 mbps	config bwprovisioning
		Maximum		bwallocation maximum
		Traffic Class Weight	1	config bwprovisioning
				trafficclass weight
Security
	IEEE 802.1X
		Add users	All	config dot1x port users
				add
		Control Mode	Auto	config dot1x port
				controlmode
		Initialization	Disable	config dot1x port
				initialize
		Maximum # of	2	config dot1x port
		requests		maxrequests
		Mode	Disable	config dot1x
				adminmode
		Port initialize	Disable	config dot1x port
				initialize
		Quiet Period	60 seconds	config dot1x port
				quietperiod
		Reauthentication	False	config dot1x port
		Enabled		reauthenabled
		Reauthentication	3600 seconds	config dot1x port
		Period		reauthperiod

231