Click the Apply button to update the switch with new values. If you want the switch to retain the new values across a power cycle you must perform a save.

Telnet

Use this panel to configure Telnet settings.

Telnet Login Timeout (minutes)

Specify how many minutes of inactivity should occur on a Telnet or SSH session before the switch logs off. A zero means there will be no timeout. You may enter any number from 0 to 160. The factory default is 5.

Maximum Number of Telnet Sessions

Use the pull-down menu to select how many simultaneous Telnet and SSH sessions will be allowed. The maximum is 5, with 5 being the factory default.

Allow New Telnet Sessions

Indicates whether new Telnet sessions are allowed. If you set this to no, new Telnet and SSH sessions will not be allowed. The factory default is yes.

Click the Apply button to update the switch with new values. If you want the switch to retain the new values across a power cycle you must perform a save.

User accounts

Use this panel to reconfigure an existing user account or to create a new one. This panel is only available for the user with Read/Write privileges, herein referred to as admin.

Intel® Blade Server Ethernet Switch Module IXM5414E

51

Page 61
Image 61
Intel IXM5414E manual User accounts, Telnet Login Timeout minutes, Maximum Number of Telnet Sessions