172 Intel® Blade Server Ethernet Switch Module IXM5414E
config users passwd
Use this command to change the passwor d of an existing user. The password is up to eight
alphanumeric characters and is case-sensitive.
After you enter this command you will be prompted for the user’s current password. If none, press
enter.
Default Blank (indicating no password) for users with Read-only access. For those with
Read/write access the factory standard password is “PASSW0RD.” Please note the
use of zero instead of the letter “O.”
Format config users passwd <user>
config users snmpv3 accessmode
Use this command to specify the SNMPv3 access privileges for the specified user account. The valid
accessmode values are <readonly> or <readwrite>. The <user> is the login user name for which the
specified access mode will apply.
Default readwrite for admin user; readonly for all other users
Format config users snmpv3 accessmode <user> <readonly/readwrite>
config users snmpv3 authentication
Use this command to specify the protocol to be used to authenticate a user account. The valid
authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password
will be used as the SNMPv3 authentication password. The <user> is the user account for which the
specified authentication protocol will be used.
Default no authentication
Format config users snmpv3 authentication <user> <none/md5/sha>
config users snmpv3 encryption
Use this command to specify the encryption protocol and key to be used to authenticate a user
account. The valid encryption protocols are none or DES. The DES protocol requires a key, which
can be specified on the command line. The key may be up to 16 characters long. If the DES protocol
is specified but a key is not provided, you will be prompted for the key. If none is specified as the
protocol, you may not enter a key. The <user> is the user account for which the specified encryption
protocol will be used.
Default no encryption
Format config users snmpv3 encryption <user> <none/des [key]>
show users info
Use this command to display the configured user names and their settings. This command is only
available for the user with Read/write privi leges.
Format show users info
User Name The name the user will use to login using the serial port, Telnet or Web.