Login | Select the authentication login list you want to configure. Select Create to define a |
| new login list. When you create a new login list, Local is set as the initial |
| authentication method. |
Login Name | If you are creating a new login list, enter the name you want to assign. It can be up |
| to 15 alphanumeric characters long and is not case sensitive. The |
| you use to specify authentication methods only appear after you create a list by |
| entering a name. |
Method 1 | Use the |
| authentication login list. If you select a method that does not time out as the first |
| method, such as local, no other method will be tried, even if you have specified |
| more than one method. Note that this parameter will not appear when you first |
| create a new login list. The options are: |
| Local |
| The user's locally stored ID and password will be used for authentication. |
| Radius |
| The user's ID and password will be authenticated using the RADIUS server |
| instead of locally. |
| Reject |
| The user is never authenticated. |
| Undefined |
| The authentication method is unspecified (this may not be assigned as the |
| first method). |
Method 2 | Use the |
| the selected authentication login list. This is the method that will be used if the first |
| method times out. If you select a method that does not time out as the second |
| method, the third method will not be tried. Note that this parameter will not appear |
| when you first create a new login list. |
Method 3 | Use the |
| selected authentication login list. Note that this parameter will not appear when you |
| first create a new login list. |
Click the Apply button to cause the changes made on this screen to take effect on the switch. If you want the switch to retain the new values across a power cycle, you must perform a save.
Click the Delete button to remove the selected authentication login list from the configuration. The delete will fail if the selected login list is assigned to any user (including the default user) for system login or IEEE 802.1X port access control. You can only use this button if you have Read/Write access.
Login session
This panel displays the details for all user login sessions.
54 | Intel® Blade Server Ethernet Switch Module IXM5414E |