Intel IXM5414E manual File Type, Tftp Server IP Address, Tftp File Path, Tftp File Name

File Type

Specify the type of file to be downloaded to the switch: Code

8051 MCU Code Config

SSH RSA1 Key File SSH RSA2 Key PEM File SSH DSA Key PEM File

SSL Trusted Root Certificate PEM File SSL Server Certificate PEM File

SSL DH Weak Encryption Parameter PEM File SSL DH Strong Encryption Parameter PEM File 8051 MCU Code

TFTP Server IP Address

Enter the IP address of the TFTP server. The factory default is 0.0.0.0.

TFTP File Path

This field specifies the directory path on the TFTP server where the file to be downloaded to the switch is located. The switch will retain the last file path used.

TFTP File Name

This field specifies the name of the file that is to be downloaded to the switch. The switch will remember the last file name used.

The last row of the table is used to display information about the progress of the file transfer. The screen will refresh automatically until the file transfer completes.

The Intel® Blade Server Ethernet Switch Module IXM5414E software supports the use of a TFTP client. The TFTP client path statement requirement is server dependent. A path statement is generally required to setup the TFTP client; however, the client path may remain blank. See the example of the path setup.

TFTP Upload Example:

The TFTP upload example details three scenarios for TFTP client-to-server file transfer. Each scenario involves uploading the config.bin file from the switch to the location c:\tftp\ on the server. The different scenarios are detailed below:

Table 4. TFTP Upload Scenarios

TFTP Server path	TFTP Client path
c:\tftp\	blank
c:\	tftp\
c:	\tftp\

Click the Start File Transfer button to apply any changes made to the fields and initiate the download.

Click the Apply button to send the updated screen to the switch; this does not perform the file download.

Intel® Blade Server Ethernet Switch Module IXM5414E 87