Security Audit Log menu, Set Date and Time menu

Understanding the printer menus

	Use	To

	Export Log	Let an authorized user export the audit log.
		Notes:
		• To export the audit log from the printer control panel, a flash drive must be
		attached to the printer.
		• The audit log can be downloaded from the Embedded Web Server and saved
		on a computer.

	Delete Log	Specify whether or not audit logs are deleted.
	Yes	Note: Yes is the factory default setting.
	No

	Configure Log	Specify how and whether or not audit logs are created.
	Enable Audit	Notes:
	Yes	Notes:
	Yes	• Enable Audit determines if events are recorded in the secure audit log and
	No
	No	remote syslog. No is the factory default setting.
	Enable Remote Syslog	remote syslog. No is the factory default setting.
	Enable Remote Syslog	• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
	No	factory default setting.
	Yes	factory default setting.
	Yes	• Remote Syslog Facility determines the value used to send logs to the remote
	Remote Syslog Facility
	Remote Syslog Facility	syslog server. 4 is the factory default setting.
	0–23	syslog server. 4 is the factory default setting.
	0–23	• If the security audit log is activated, then the severity value of each event is
	Severity of events to log
	Severity of events to log	recorded. 4 is the factory default setting.
	0–7	recorded. 4 is the factory default setting.
	0–7

	Use	To

	Current Date and Time	View the current date and time settings for the printer.

	Manually Set Date and Time	Enter the date and time.
	[input date/time]	Notes:
		Notes:
		• Manually setting the date and time sets Enable NTP to No.
		• The wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM format.
	Time Zone	Select the time zone.
	[list of time zones]	Note: GMT is the factory default settings.

	Automatically observe DST	Set the printer to use the applicable daylight saving time (DST) start and end times
	On	associated with the printer Time Zone setting.
	Off	Note: On is the factory default setting.

	Enable NTP	Enable Network Time Protocol, which synchronizes the clocks of devices on a
	On	network.
	Off	Notes:
		• On is the factory default setting.
		• This setting is turned off if you manually set the date and time.