Lexmark MX511DHE Replace all originals if restarting job, Printer and toner cartridge regions

Troubleshooting 250

Replace all originals if restarting job.

From the printer control panel, try one or more of the following:

•Select Cancel job to clear the message and cancel the scan job.

•Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.

•Select Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.

•Select Finish job without further scanning to end the last successful scan job.

•Select Restart job to restart the scan job with the same settings from the previous scan job.

•For non‑touch‑screen printer models, press to confirm.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

Printer and toner cartridge regions

Region number	Region
0	Global
1	United States, Canada
2	European Economic Area (EEA), Switzerland
3	Asia Pacific, Australia, New Zealand
4	Latin America
5	Africa, Middle East, rest of Europe
9	Invalid

Notes:

•The x and y values represent .xy in the code that appears on the printer control panel.

•The x and y values must match for printing to continue.