Additional printer setup

26

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

Memory card

DDR3 DIMM

Flash memory

Fonts

Firmware cards

Forms Barcode

Prescribe

IPDS

Printcryption

Printer hard disk1

LexmarkTM Internal Solutions Ports (ISP)

Parallel 1284B interface

MarkNetTM N8350 802.11 b/g/n wireless printer server1

MarkNet N8352 802.11 b/g/n wireless printer server2

MarkNet N8130 10/100 fiber interface

RS232C serial interface

1This internal option is available only in MX510de, MX511de, and MX511dhe printer models.

2This internal option is available only in MX410de printer model.

Page 26
Image 26
Lexmark MX511DHE, 35S5703, 35S5704 manual Additional printer setup, Installing internal options, Available internal options