Lexmark 35S5704, 35S5703, MX511DHE manual Adjusting Sleep mode, Saving money and the environment 205

Saving money and the environment 205

Use

On

Off

3Click Submit.

To

Reduce printer noise.

Notes:

•Print jobs are processed at a reduced speed.

•Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed.

Use factory default settings.

Note: This setting supports the performance specifications of the printer.

Adjusting Sleep mode

To save energy, decrease the number of minutes the printer waits before it enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.

Note: The printer still accepts print jobs when in Sleep mode.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Timeouts.

3In the Sleep Mode field, enter the number of minutes you want for the printer to wait before it enters Sleep mode.

4Click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2In the Sleep Mode field, select the number of minutes you want for the printer to wait before it enters Sleep mode.

3Touch .