Lexmark 35S5704, 35S5703 Storing supplies, Ordering an imaging unit, Ordering a maintenance kit

Maintaining the printer 217

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner from toner cartridge.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name

Imaging unit

Lexmark Return Program	Regular
500Z	500ZA

Ordering a maintenance kit

Notes:

•Using certain types of paper may require more frequent replacement of the maintenance kit.

•The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the maintenance kit and can be individually ordered and replaced if necessary.

•Contact your service representative to replace the maintenance kit.

Recommended maintenance kits and part numbers

Maintenance kit	Part number
100‑V maintenance kit*	40X9146
110‑V maintenance kit	40X9135
220‑V maintenance kit	40X9136
* This is available only in Japan.

Ordering an ADF separator roller

Order an ADF separator roller when the ADF fails to pick paper or picks more than one sheet of paper at a time.

For information on replacing the ADF separator roller, see the instruction sheet that came with the part.

Recommended part numbers

Part name

Separator roller

Part number

40X9108

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

•Direct sunlight

•Temperatures above 35°C (95°F)

•High humidity above 80%