Lexmark 35S5703, 35S5704 manual Understanding the printer menus 164, Error Recovery, Print Recovery

Understanding the printer menus		164
	Use	To
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255	Notes:
		• 90 is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the scanner checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535	• 40 is the factory default setting.
		• Wait Timeout is available only when the scanner is using
		PostScript emulation. This has no effect on PCL emulation
		print jobs.
	Timeouts	Set the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255	continues to print other jobs in the print queue.
		Notes:
		• 30 is the factory default setting.
		• This menu item appears only when a printer hard disk is
		installed.
	Error Recovery	Automatically reboot the printer.
	Auto Reboot	Note: “Reboot when idle” is the factory default setting.
	Reboot when idle
	Reboot always
	Reboot never
	Error Recovery	Determine the number of automatic reboots the printer can
	Max Auto Reboots	perform.
	1–20	Note: 5 is the factory default setting.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when these are not resolved within the specified time
	Disabled	period.
	5–255	Note: Disabled is the factory default setting.