Lexmark MX511DE Custom Scan Sizes menu, Universal Setup menu, Understanding the printer menus 143

Understanding the printer menus 143

Custom Scan Sizes menu

Use	To
Custom Scan Size [x]	Specify a custom scan size name and page orientation.
Scan Size Name	Notes:
Width
	• The custom scan size name replaces Custom Scan Size [x] in the printer
Height
	menus.
Orientation
	• ADF Media Type is the factory default setting for custom scan sizes 3, 4,
Portrait
	5, and 6.
Landscape
	• 8.5 inches is the U.S. factory default setting for Width. 210 millimeters is
2 scans per side
	the international factory default setting for Width.
Off
	• 14 inches is the U.S. factory default setting for Height. 297 millimeters is
On
	the international factory default setting for Height.
	• Portrait is the factory default setting for Orientation.
	• Off is the factory default setting for “2 scans per side.”

Universal Setup menu

Use	To
Units of Measure	Identify the units of measure.
Inches	Notes:
Millimeters
	• Inches is the US factory default setting.
	• Millimeters is the international factory default setting.
Portrait Width	Set the portrait width.
3–8.5 inches	Notes:
76–216 mm
	• If the width exceeds the maximum, then the printer uses the
	maximum width allowed.
	• 8.5 inches is the US factory default setting. You can increase the
	width in 0.01‑inch increments.
	• 216 mm is the international factory default setting. You can increase
	the width in 1‑mm increments.
Portrait Height	Set the portrait height.
3–14.17 inches	Notes:

76–360 mm

•If the height exceeds the maximum, then the printer uses the maximum height allowed.

•14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments.

•356 mm is the international factory default setting. You can increase the height in 1‑mm increments.