Lexmark 35S5704 Understanding the printer menus 189, Duplex Binding, Paper Saver Orientation

Understanding the printer menus		189
Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
1 sided	Note: “1 sided” is the factory default setting.
2 sided
Duplex Binding	Define binding for duplexed pages in relation to the page orientation of the printed document.
Long Edge	Notes:
Short Edge
	• Long Edge is the factory default setting. This assumes binding along the long edge of the
	page (left edge for portrait and top edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for portrait and
	left edge for landscape).
Paper Saver Orientation	Specify the orientation of a multiple‑page document.
Auto	Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Landscape
Portrait
Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
Off	Notes:
2‑Up
	• Off is the factory default setting.
3‑Up
	• The number selected is the number of page images that will print per side.
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border	Print a border on each page image.
None	Note: None is the factory default setting.
Solid
Paper Saver Ordering	Specify the positioning of multiple‑page images.
Horizontal	Notes:
Reverse Horizontal
	• Horizontal is the factory default setting.
Reverse Vertical
	• Positioning depends on the number of page images and whether they are in portrait or in
Vertical
	landscape orientation.
Separator Sheets	Specify whether blank separator sheets are inserted.
Off	Notes:
Between Copies
	• Off is the factory default setting.
Between Jobs
	• Between Copies inserts a blank sheet between each copy of a print job if Collate is set to
Between Pages
	“1,2,3 ‑ 1,2,3”. If Collate is set to “1,1,1 ‑ 2,2,2”, then a blank page is inserted between
	each set of printed pages, such as after all page 1's and after all page 2's.
	• Between Jobs inserts a blank sheet between print jobs.
	• Between Pages inserts a blank sheet between each page of the print job. This setting is
	useful when printing transparencies or when inserting blank pages in a document .
Separator Sheet Source	Specify the paper source for separator sheets.
Tray [x]	Note: Tray 1 is the factory default setting.
Manual Feeder