Lexmark 35S5703, 35S5704, MX511DHE, MX511DE Imaging unit very low, x estimated pages remain 84.xy

Troubleshooting 244

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the User’s Guide.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

•Load the correct size of paper in the tray.

•From the printer control panel, select Continue to clear the message and print using a different tray. For

non‑touch‑screen printer models, press to confirm.

•Check the tray length and width guides and make sure the paper is loaded properly in the tray.

•Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.

•Make sure the paper size and type are specified in the Paper menu on the printer control panel.

•Make sure that the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.

•Cancel the print job.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

•From the printer control panel, select Continue to stop the defragmentation and continue printing. For

non‑touch‑screen printer models, press to confirm.

•Delete fonts, macros, and other data from the printer memory.

•Install additional printer memory.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.

Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

•From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press

to confirm.

•Delete other held jobs to free up additional printer memory.