10

Network Interfaces and Equipment

Integrated Services Digital Network - Basic Rate Interface (ISDN-BRI)

DEFINITY ProLogix Solutions can connect to equipment or endpoints that support an Integrated Services Digital Network (ISDN) by using the Basic Rate Interface (BRI). This feature is a 192-Kbps interface that carries two 64-Kbps B-channels and one 16-Kbps D-channel.

The ISDN-BRI Trunk circuit pack enables DEFINITY ProLogix Solutions to support the T interface and the S/T interface as defined by ISDN standards (ITU-T recommendation I.411). The circuit pack provides eight ports to the network and supports two B channels and one D channel. ISDN-BRI Trunk provides the following advantages:

Provides an inexpensive way to connect to ISDN services provided by the network provider

Meets almost all ETSI Country protocol requirements

Supports essential (not supplementary) ISDN services

DEFINITY ProLogix Solutions Release 2.0 supports the NT (network) side of the T interface using the TN556C circuit pack. This give DEFINITY ProLogix Solutions full tie trunk capability using BRI trunks. DEFINITY ProLogix Solutions Release

2.0supports leased BRI connections through the public network, with a TN2185 on each end of the leased connection. However, DEFINITY ProLogix Solutions Release

2.0does not allow you to administer both endpoints and trunks on the same TN556C circuit pack.

DEFINITY ProLogix Solutions Release 2 Overview 555-235-100

Issue 2 June 1999 10-21

Page 193
Image 193
Lucent Technologies 555-235-100 manual Network Interfaces and Equipment