Paradyne CPX-1000 manual Hot Swapping an MP Card

5. Repair Procedures 1000-A2-GN22-00

Important

Do not force the card into place—this may cause damage to the connector pins.

Step 8 Snap the card ejectors into the locked position.

Hot Swapping Hot swapping lets you remove and replace cards without shutting down and reconfiguring the CPX. To hot swap:

an MP card—go to Hot Swapping an MP Card, below

CP and HSC cards—go to page 5-11

￿Line cards—go to page 5-11

Notes

Hot Swapping an MP Card

Make sure to put on an anti-static wrist wrap when hot swapping cards. Refer to JetVision User’s Guide.

When removing a card—always remove the processing module (front) before removing the transition module.

When inserting a card—always insert the transition module (back) before inserting the processing module.

To hot swap an MP card, refer to JetVision User’s Guide and:

Step 1	Back up the current CPX database.
Step 2	Click the MP card in the Tree or Shelf views.
Step 3	Select Remove Resources from the Configuration menu. A
	prompt displays to confirm you want to remove the resources.
Step 4	Click Yes. The card is removed from the Tree and Shelf views.
Step 5	Remove and replace with the new cards per Removing and
	Replacing Cards on page 5-9.
Step 6	Select Refresh CPX from the File menu. The new MP card
	appears in the Tree and Shelf views.
Step 7	Restore the CPX configuration.

5-10 February 2003