Paradyne CPX-1000 manual Hot Growth

1000-A2-GN22-00 5. Repair Procedures

Hot Growth	You can add cards to the CPX without losing calls or rebooting the
	CP or MP cards or the CPX-1000.
	To add a card, refer to JetVision User’s Guide and:
Step 1	Insert a card to its assigned slot.
	Note
	Insert the transition card first, then insert the front card.

	Important
	Do not force a card into place—this may cause damage to
	the connector pins.
Step 2	Snap the card ejectors into the locked position.
Step 3	Select Refresh in JetCraft to see the new card(s).
Step 4	Provision the cards, as required.

February 2003 5-13