Paradyne CPX-1000 manual Attach OC-3 ATM Cables, To attach OC-3 cables to the CPX

3. Installing the CPX-1000 1000-A2-GN22-00

Attach OC-3 ATM Cables

After verifying the installation of hardware, proceed to connect the required inter-system cables.

	CAUTION
	CLASS 1 LASER
	Laser hazard—never look directly into the OC-3 connectors.
	They are a source of a laser beam, which may be invisible.
	Looking directly into the fiber optic connector may seriously
	harm y our eyes.
	To attach OC-3 cables to the CPX:
Step 1	Remove the dust cover from the ATM fiber-optic SC connector
	sockets located on the ATM panel. (Save the dust cover for re-use.)
Step 2	Plug the fiber optic cable’s transmit and receive connectors into the
	ATM fiber-optic SC connector sockets.

Notes

Do not mix optical modes. Using mismatched optical fibers may result in damage to the equipment.

If you are using single mode OC-3 modules, use single mode optical cables. If you are using multimode OC-3 modules, use multimode optical cables.

ATM OC-3 SC Ports

ATM 155

Tx

Rx

Dust Cover

0160

3-24 February 2003