Paradyne CPX-1000 Sets the DS1 line length or Line Build Out LBO, Tap/monitor H.110 time slots

A. Using the Console 1000-A2-GN22-00

setlinelen	Sets the DS1 line length or Line Build Out (LBO)
	Cpx> setlinelen <ifg> [<ds1>]—Shows the Line Length
	setting for <ifg>
	Cpx> setlinelen default <length>—Sets the default Line
	Length setting for all ifgs
	Cpx> setlinelen <ifg> all<ds1> <length>—Sets the Line
	Length for <ifg>
	Where:
	<length> = 0 for lengths 0 to 133 ft.
	<length> = 1 - length of 133 - 266ft.
	<length> = 2 - length of 266 - 399ft.
	<length> = 3 - length of 399 - 533ft.
	<length> = 4 - length of 533 - 655ft.
tap	Tap/monitor H.110 time slots
	Cpx> tap — Shows currently configured taps
	Cpx> tap on <timeslot> <PSTN card> <PSTN port>
	<ds0> — Monitor <timeslot> on the specified DS1 DS0
	Cpx> tap off <timeslot> — Disable existing tap on
	<timeslot>
	Where:
	<timeslot> = H.110 timeslot to tap (0—4095, get
	from sub or crv displays).
	Note: For STS-1, timeslots should be limited to 0—
	2047.
	<PSTN card> = PSTN card used to tap (1—N, counted
	from left to right). PSTN cards supported are T-1
	and STS-1.
	<PSTN port> = PSTN port on <PSTN card> used to tap
	(1—8 for T-1, 1—28 for STS-1)
	<ds0> = DS0 on <PSTN port> used to tap (1—24)
	Note
	You cannot use a T1 card to tap a timeslot being sourced from
	that same T1 card.
vpath
	Displays active voice path information
	Cpx> vpath all — Displays all active voice
	paths in the system
	Cpx> vpath <timeslot> — Displays the voice
	path associated with <timeslot>
	Where:
	<timeslot> = H.110 timeslot (0-4095, get from
	sub or crv displays)

A-10 February 2003