Paradyne CPX-1000 Inventory CPX Components, Into the bottom box lid, Inspect the CPX for damage

1000-A2-GN22-003. Installing the CPX-1000

Step 3	Remove the inside top shock absorber, then lift off the box sides.
Step 4	Open the plastic bag covering the equipment, and push it down
	into the bottom box lid.
Step 5	Inspect the CPX for damage.
Step 6	If damaged, return the equipment to Paradyne (Warranty, Sales,
	Service, and Training Information at the beginning of this
	document).
	Caution

Step 7

Inventory CPX Components

The CPX weighs 90 lbs. when the module cage is fully loaded. Shipping weight, including the packaging material and the pallet, is 126 lbs.

Use safe lifting techniques—have another person help you to remove the shelf from the box bottom and pallet.

With the help of another person, carefully lift the CPX enclosure from the box and place it on a firm, stable surface.

Before beginning installation, inventory the components against your packing list or order. If any components are missing, notify the Technical Support Center (TSC).

Typical contents will include:

—1 CPX Chassis

—1 MP Card

—2 CP Cards

—2 HSC Cards

—STS Splitter Assembly (for STS equipped CPX)

—MP to CP cables

—CP to CP cables

—Mounting flanges, screws and other hardware

—T1 or STS cards (to order)

Check all packages received for these components. Usually, the cards are pre-installed in the unit; some cards may be packed separately.

February 2003 3-11