Paradyne CPX-1000 manual Establishes a voice path between two subscriber ports, Reboots the CP

1000-A2-GN22-00A. Using the Console

portloop	Establishes a voice path between two subscriber ports.
	Cpx> portloop on <sub1> <port1> <sub2> <port2>
	— Establishes a voice path between the two
	ports
	Cpx> portloop off <sub1> <port1> <sub2>
	<port2>—Disconnects a previously established portloop
reboot	Reboots the CP
	Cpx> reboot verify
restartsub	Sends a restart request to a subscriber
	Cpx> restartsub <sub> [<immed>]
	Where:
	<immed> = 0 = Wait until <sub> has no active calls (default)
	<immed> = 1 = Restart immediately
setactiveport	Sets the active port in an ATM port group
	Cpx> setactiveport <portgroup> <port>
setcdv	Displays/sets ATM Cell Delay Variation (CDV)
	Cpx> setcdv—Displays current Cell Delay Variation
	Cpx> setcdv <newcdv>—Sets a new Cell Delay Variation
	Where:
	<newcdv> = Maximum jitter to tolerate in received cells from
	subscribers (in milliseconds)
setechocancel	Sets Echo Cancellation type for a given subscriber port
	Cpx> setechocancel <sub> <port> nonefar—Sets Echo
	Cancellation for one port on a subscriber
	Cpx> setechocancel <sub> all nonefar—Sets Echo
	Cancellation for all ports on a subscriber
	Note
	This setting is a temporary override only and is overwritten by
	any reprovisioning.

February 2003 A-9