Appendix A • Control Panel Menus
2.Test Print Head
Before you select this option, make sure that the material is loaded in the printer input area so you can print a test pattern.
To use this option:
1.Press the + or – buttons to scroll through the Setup Menu options until the 2. TEST PRINT HEAD option appears on the LCD panel.
2.Press the Enter button to select this option. The LCD will display “Print test pattern?”
3.Press + for Yes to print the test pattern, or press – for No to cancel.
If you press +, “Please wait...Test pattern is print- ing” displays. The printer prints a diagonal line across the material. If a gap is present within the diagonal line, the nozzle may be blocked and need to be cleaned.
4.Press the Menu button to back out of the menu until the printer displays OFF LINE . Then press the ON LINE button to enable the printer.
Pitney Bowes DA500/DA550 Operator Guide |
