3 • DA500/DA550 Basics
Setting Up A Job (continued)
8. Adjust the Upper Exit Rollers
Adjust the upper exit rollers so the outside edge of the rollers overlap the left and right edges of the material by 1/4". Slide the rollers from side to side to make the adjustment.
IMPORTANT:
Make sure the rollers do not touch any printed area of the material. If this happens, the rollers will act like a printing press and imprint a faint impression at incremental distances on the material. If this happens, move the roller or rollers toward the nearest clear zone, that is, an area free of printing.
Pitney Bowes DA500/DA550 Operator Guide |
